An Approach to Reducing Parameter Uncertainty for Robotic Surface Assembly Tasks

1 online resource (122 pages) : PDF

2014

University of North Carolina at Charlotte

In contrast to hard automation, which relies on the precise knowledge of all parameters and special-purpose machinery, the goal of flexible assembly is to overcome the inherent uncertainty in the location of the parts. The main result of this dissertation is that, for rigid, non-deformable objects, more accurate estimates of parameters, which describe the position and orientation in Cartesian space, can be obtained through active part interaction. If the objects have large polyhedral or convex features, the parameter estimation problem can be recast in terms of fitting the collected empirical data to a suitable geometrical model. The planning and execution steps are treated as conceptually separate from the estimation. Grasping is outside of the scope of this work, and it is assumed throughout that one of the objects is held by the gripper. Additionally, an algorithm for automatic conversion of a compliant path from the Cartesian to the joint space of a general-purpose, 7 degrees of freedom robotic arm is described. This allows for the assembly strategies to be planned in terms of objects' topological features in the task frame. A `back-drivable' Barrett WAM robotic arm without a force sensor was used in all experiments. Consequently, the primary focus is on planning, control, and assembly without force sensing. Instead, approximate compliant motion is achieved by relying on torque limits and impedance. The underlying concepts, however, are much more general and could be extended to incorporate force feedback.

doctoral dissertations

Computer science
Robotics

Ph.D.

Assembly Tasks
Error Estimation
Parameter Uncertainty
Singularity Detection

Information Technology

Xiao, Jing

Akella, Srinivas
Ras, Zbigniew
Fan, Jianping
Bishwal, Jaya

Thesis (Ph.D.)--University of North Carolina at Charlotte, 2014.

This Item is protected by copyright and/or related rights. You are free to use this Item in any way that is permitted by the copyright and related rights legislation that applies to your use. For other uses you need to obtain permission from the rights-holder(s). For additional information, see http://rightsstatements.org/page/InC/1.0/.

Copyright is held by the author unless otherwise indicated.

Saric_uncc_0694D_10570

http://hdl.handle.net/20.500.13093/etd:1414